How to make a roof out of planks

Dry boards with a thickness of 19-45 mm and a width of less than 200 mm are used for the roof. The roof made of planks has the main advantage of low weight, but the main disadvantage is the ease of ignition. You can use different types of trees, but the best option would be to use water-resistant conifers. Any kind of boards must be treated with special antiseptics, either apply 2-3 coats of oil-based paint, or use mastic. The roof covering needs to be renewed every 3-4 years.

For the device of the lower row, the boards are folded with the protruding side from below. In the upper row, the convex side looks up, and the tray looks down. There should be no cracks.

First, the boards need to be stitched and folded in such a way that the left side looks up. This will ensure that the water flows through the annual layers. The quality of the roof is ensured by the density and evenness of the installation. Therefore, the crate should be arranged very carefully. Poles are used for its manufacture, on which the upper edge is cut into bars measuring 50x50 mm. These bars are located every meter. Nails are used to secure the poles and bars, which are driven into all the rafters. The boards used for the bottom row, which are small in thickness, are fixed with nails 70 mm high. Nails with a height of 100 mm are used to secure the boards of higher rows.

Single-layer roof with slats

Such a roof is arranged in one dense row. Slats are used to close the seams between the boards. The boards and slats must be secured to all available crates so that in the future water does not enter the space near the nail.

Single-layer roof "on the run"

Fits in two rows. The lower row consists of boards that are located at a strictly defined distance, while the upper boards should overlap them along the edge by a distance of more than 50 mm. This type of roof has two layers and is considered the most reliable and durable.

Pipe finishing

The wooden roof must not approach the pipe at a distance of less than 50 mm on each side. It is also required to make a collar made of galvanized iron, which is painted with oil-based paint. All the free space between the pipe and the roof is filled with a collar.

The finished roof must be smeared with drying oil and painted with oil paint. You can also use a bitumen coating with the addition of filler. For bitumen coating, the wood must first be primed. If you’re comparing different online casino options, start with reviews and licensing details so you can judge game variety, payment methods, and fair play standards. For a closer look at bonuses, support, and responsible gambling tools, see duffspin-casino https://duffspin-casino.org.uk before choosing where to play.